Main Catalogue | Lubricants and Adhesives | Electrolube Static Products
Ref: 4097141A
Measures surface resistivity and resistance to ground. Supplied with test lead kit plus static dissipative carrying pouch, ideal for quick checks on working surface etc, range 10 sq - insulative.power 9V pp3 battery.
Ref: 4097145A
General purpose ECP 1606 static monitor for measuring surface voltage up to 100kV. 0805 jj click to enlarge click to enlarge
Ref: 4600611
A comprehensive range of products to solve all your static related problems
Ref: 4600604
Solves static related problems such as :
Ref: SE2005HD
Ideal for eliminating static related problems such as:
Ref: 4600606
Can be supplied to virtually any surface, effectively removes flux residues, oily finger marks, grease nicotine, dirt or grime, leaves no film, is non-streaking and non-flammable, contains no alkali or ammonia, restores surfaces to original performance levels, non-abrasive. 0.95 litres. 06/03 jj Click for bigger image
Ref: SE5001CR
Maintains clean room surfaces and major floor mounted equipment and other static prone materials, sodium and chloride free, non-toxic and non-corrosive, bacteriostatic, no powdering/out-gasing, apply on hard surfaces with a lint free wipe or an approved clean room mop, filtered to 0.5 microns, 0.95 litres, 06/03 jj Click for bigger image
Ref: 4600608
Skin moisturising lotion which helps to improve wrist strap performance, equipped to prevent and handle static discharge, especially in the electronics industry, helps keep skin moistened without risk of contamination, non acidic, gllycerine, silicone, lanolin and mineral oil free, absorbs quickly. 8oz bottle. 06/03 jj Click for bigger image
Ref: SE46001UF
Specially formulated for controlling static generation on all types of resilient tile, sheet goods, sealed wood and concrete floors. Easily maintained and repaired with no buffing, extends stripping/re-coating cycle, provides superior abrasion performance that can last up to 18 months, fast drying, resists scuffs-will not yellow, resists powdering or flaking, even in dry conditions, contains low volatile organic compounds, biodergradable and safe to use, controls static generation even at low relative humidities. 3.75 litres, 06/03 jj Click for bigger image
Ref: SE48001UF
An ideal product whenever sensitive equipment is present on static dissipative floor tiles, superior performance that can last 12-18 months on static dissipative floors, easily maintained and repaired with no buffing, extends stripping/re-coating cycle, resists powerdering or flaking, even in dry conditions-especially in clean rooms, tough to scuff, does not yellow-UV additives in formulation, dries to a glossy appearance on dissipative tiles with no buffing, controls static generation even at low relative humidities, low volatile organic compound content, blacks marks easily removed-increases life of dissiaptive tiles, non-flammable. 3.75 litres. 06/03 jj Click for bigger image
Ref: SE40001AF
Perfect for production areas, warehousing, shipping laboratories and electronic repair facilities, easy to apply, cost effective to use, protects against damage caused by static discharge, low volatile organic compound content, high resistance to abrasion, controls static generation even at low humidities, resists powdering and discloration. 3.75 litre, 06/03 jj Click for bigger image
Ref: SE40201AN
A highly concentrated anti-static cleaner for use in all facilities, leaves no film, low foam level, constant detergency, non streaking, safe for septic and sewage systems, contains no phosphates or alkalies, will not degrade production environment anti-static properties, use in conjunction with staticide floor stripper to properly prepare floors for the application of ESD floor finish, dilution rate- 1:128 (1 part cleaner to 128 parts water) . 3.75 litres, 07.11 dc
Ref: SE41001RC
A low VOC static dissipative cleaner, designed forhigh performance ESD control on non-conductive flooring, high solids concentration, can be easily buffed, low foam formulation, non-toxic and biodegradable, for use in clean rooms, electronic production and assembly areas, computer rooms, hospital operating rooms and any other areas sensitive to electrostatic discharge, an effective cleaner on any sealed or hard floor surface, including sealed concrete, marble, wood, terrazzo, solid vinyl, vinyl asbestos and asphalt tile, dilution ratio-1:10 (1 part cleaner to 10 parts water) 3.75 litres, 06/03 jj click for bigger image
Ref: SE40101FS
Removes multiple coats of wax or synthetic floor finishes, will not damage or dull flooring when used according to manufacturers recommendations, non-ammoniated, biodegradable, no harsh odours, non-streaking, low foaming, effective in hard or soft water, removes embedded dirt providing a completely clean and finish ready surface by emulsifying dirt and residual particles of old wax or coating, dilution ratio-1:16 ( 1 part stripper to 16 parts water) 3.75 litres 06/03 jj Click for bigger image
Ref: SESWC135
Long lasting wipes that protects sensitive equipment from costly static problems, for use on all materials that are not adversely affected by water or alcohol, comes in a handy dispensing pack, meets or exceeds military electrostatic decay criteria, prevents dust attraction, safe and eay to use, biodegradable, long lasting, one step cleaning and static control. 135 wipes per canister, 06/03 jj Click for bigger image
Ref: SETWC135
An effective impregnated wipe, which cleans and disinfects hard non-porous surfaces, cleans and disinfects telephone, dictating equipment, earphones and other telecommunications equipment, comes in a handy dispensing pack, safe and easy to use, non toxic/non-flammable, EPA registered. 07/03 jj Click for bigger image
Ref: SECCW135
Ideal for cleaning most types of glass and plastic including goggles, cameras, binoculars, microscope, camcorders and magnifiers, safe and easy to use,, economicaal in use, prevents dust and fog build up, comes in a handy dispensing pack. 06/03 jj Click for bigger image
Ref: SE5075WB
This waste paper bin is a high density polyethylene container which does not contain carbon, dyes or additives, It will not tribogenerate, and will dissipate static electricity. The container measures 10-10 ohms for surface resistance, high impact resistance - will not out gas, Convenient for office or laboratory -permanently dissipative, Safe to use in solvent areas - Debris can be bagged safely, Clean room and environmentally safe. size 40cm diameter x 55cm high ( 11 gal ) (16" diameter x 22" high ) 07/03 jj
Ref: 4097148
Most widely used electrostatic locator, designed for close and repetitive readings, uses standard 9 volt battery with battery test feature, low drift, repeatability + 1%, unique " quick zero" function which instantly re-zeros the instruments and provides ground compensation for the user. 07/03 jj Click for bigger image
