Avo Multimeters

Extremely easy to use Tough rubber armoured case Self contained protective cover

Live circuit warning Weatherproof to IP54 Intelligent Safety System for protection.

MEGGER INSULATION TESTERS COMBINE SAFETY WITH DURABILITY Developed, after extensive customer research, specifically to meet the needs of today's electrical contractors, the new MIT300 range of insulation and continuity testers from Megger is not only durable and easy to use, but also incorporates a comprehensive set of features designed to ensure operator safety, even under conditions of accidental misuse.

The range includes four models, ensuring an exact match for the needs of every user, all of which offer automatic discharge of the circuit after testing, audible and visual warning if the test probes are applied to a live circuit, and a test inhibit feature which operates automatically under live circuit conditions. The units also conform fully to IEC 61010-1 for use in Category III 600V applications, and provide all of the facilities needed to meet insulation testing requirements relating to the current edition of the IEE Wiring Regulations.

In line with other products in Megger's comprehensive new contractor range, MIT300 insulation testers feature rugged construction, with an impact-resistant rubber-overmoulded case, and innovative circuitry which guarantees high accuracy combined with stability of calibration. All instruments in the new range provide indication of insulation resistance up to 999Mohms, 200mA continuity testing, a fast-reacting continuity buzzer, and facilities for nulling the resistance of the test leads. The entry-level MIT300 offers insulation test voltages of 250V and 500V, while the remaining models allow testing at 250V, 500V and 1,000V. In addition to the basic features, the mid-range MIT310 adds a default voltmeter function, while the MIT320 supplements these facilities with an a backlit display, illuminated range panel, insulation limit alarm, resistance measurement, and an adjustable threshold for the continuity buzzer. The MEGIT320 is also supplied with a switched test probe to speed hands free testing. An illuminated switched test probe is available as an optional extra for use with the MIT320. The MIT310, MIT320 and MIT330 testers incorporate dual solid-state displays which simultaneously show the test results numerically, and in the form of a moving-arc bar graph that accurately simulates the operation of an analogue meter. The MIT330 additionally offers the facility to save test results to internal memory. Over 1000 result can be saved on site, and downloaded to a computer when convenient.

Data is stored in non-volatile memory, being retained when the instrument is switched off or batteries are exhausted. A Job reference number can be selected for a range of results, allowing separate locations to be tested with the same tester and easily separated when downloaded. A memory bar graph acts as a ‘Fuel Gauge’ showing how much memory has been used. Test results are downloaded to CSV (Coma Separated Variable) spreadsheets. If certificates or reports are required, the results can be downloaded directly into Megger Powersuite Professional with a range of features for creating professionally finished documentation.

All testers come complete with a full calibration certificate. For users who prefer a true analogue device, however, Megger is offering the MIT310A which has features similar to those of the MIT310, but with a conventional moving-coil meter movement in place of the digital display 05/06 JJ
CLICK TO ENLARGE

Non-tripping loop tester 3 Phase safe • Single or phase-phase loop testing • Enables testing on 110 V centre tapped supplies. Easy Intuitive operation Tough rubber armoured case with built-in cover Weatherproof to IP54 Result storage and downloading USB interface A test option which is guaranteed not to trip RCDs, and safe operation even if accidentally connected to a live three-phase supply, are among the key benefits of Megger's new LT300 range of earth-impedance loop testers. These tough, easy-to-use instruments have been developed, after extensive customer research, specifically to address the needs of electrical contractors working in today's demanding and competitive market conditions.The new loop testers are easy to hold and use, even under difficult on-site conditions, and they have a robust rubber case with a built-in lid to protect the display, ensuring that they are easily able to withstand the rigours of day-to-day use. In addition, the instruments are IP54 ingress protection rated, indicating that they are exceptionally well protected against the entry of dust and water. To ensure an exact match with users' needs, Megger is currently initially offering its new LT300 loop testers in three versions. The entry-level Megger LT310 is ideal for those requiring instruments to carry out essential tests in line with the requirements of the 16th edition of the IEE Wiring Regulations. It performs phase-to-earth loop tests and prospective short-circuit current calculations, as well as indicating supply polarity and voltage. It offers a choice of non-tripping or fast, high-current loop testing, and conforms fully with the requirements of IEC61010-1 for Category III 300V applications.The Megger LT320 model provides all of the functionality of the Megger LT310, and adds facilities for phase-to-phase testing, supply frequency measurement, automatic calculation of final circuit impedance (R1+R2), the display of maximum Zs, and for checking phase rotation. It also incorporates a backlit display and illuminated selector switches, which aid testing in poorly lit environments.The Megger 330 model offers the added benefit data storage and downloading.

05/06 JJ

CLICK TO ENLARGE

Tests standard, DC and selective RCDs Ramp testing Auto (Remote) testing 3 Phase safe

Enables testing on 110 V centre tapped supplies. Tough rubber armoured case with built-in cover

Weatherproof to IP54 MEGGER BOOSTS SAFETY IN RCD TESTING Even if they are inadvertently connected to a live three-phase supply, RCD testers in Megger's new RCDT300 range remain undamaged, and present no safety hazard to the user. Introduced after extensive customer research into the requirements of electrical contractors, these innovative instruments combine rugged construction with straightforward operation, and they are offered at very competitive prices. Available in three models, ensuring that all users can choose a model which exactly meets their needs, RCDT300 RCD testers feature a compact ergonomic design, making them easy to handle and use, and a tough impact-resistant body with a rubber overmoulding for additional protection, plus a built-in display cover. All models in the range are water and dust resistant, with an IP54 ingress protection rating. The low-cost entry-level RCDT310 model is suitable for use on supplies between 100V and 280V, and offers 0.5I, I and 5I tests, with provision for tests starting at 0?/180? of the supply waveform, as well as for DC tests. It also has facilities for testing standard and selective RCDs, and covers current ranges from 30mA to 500mA. When connected to a live supply, it defaults to voltmeter mode. The mid-range RCDT320 covers a wider supply voltage range of 50V to 290V, allowing use with centre-tapped 110V supplies. It incorporates ramp testing testing, for RCD tripping current measurement, and the unique Megger auto sequence test feature, which saves time by allowing the tester to conduct all the RCD tests, and to store the results while the operator stands by the RCD, resetting it as appropriate. The operating current range of the RCDT320 is extended to cover 10mA to 1,000mA devices, and the ability to measure AC supply voltage and frequency is added. The large liquid crystal display for test results is backlit in this model, making it easier to use in locations with low ambient light levels. The RCDT330 additionally offers the facility to save test results to internal memory. Over 1000 result can be saved on site, and downloaded to a computer when convenient. Data is stored in non-volatile memory, being retained when the instrument is switched off or batteries are exhausted. A Job reference number can be selected for a range of results, allowing separate locations to be tested with the same tester and easily separated when downloaded. A memory bar graph acts as a ‘Fuel Gauge’ showing how much memory has been used. Test results are downloaded to CSV (Coma Separated Variable) spreadsheets. If certificates or reports are required, the results can be downloaded directly into Megger Powersuite Professional with a range of features for creating professionally finished documentation. All models in the range comply fully with the requirements of IEC61010-1 for Category III 300V applications, and are supplied complete with appropriate test leads and a calibration certificate 05/06 JJ
CLICK TO ENLARGE

Non-trip loop tester RCD testing from 10 mA to 1000 mA Extremely easy and safe to use Built-in protective front cover Tough Rubber armoured case Weatherproof 3 year warranty The Megger LRCD200 series is the latest generation of combined non-tripping loop tester and RCD test instruments that provide simple, affordable and flexible test tools for electrical contractors testing energised circuits. All Megger LRCD200 series instruments are supplied with a calibration certificate. Three instruments are available: Megger LRCD200

This instrument provides 3 phase safe non trip loop testing and 1xI tests of 10mA to 500mA RCDs.

Suitable for applications outside the UK only. Megger LRCD210 This instrument provides three phase safe non-trip loop testing and 1/2I, I, and 5I RCD testing for standard, selective and DC RCDs. Suitable for domestic installers testing to UK Part P requirements. Megger LRCD220 As the LRCD210 with the addition of 110 V loop testing and 2 wire fast testing, plus phase to phase and phase to earth measurement. All three instruments will not trip RCDs rated at 30 mA or greater during loop testing, even electronic RCDs.

05/06 JJ

CLICK TO ENLARGE

The Megger BM120 series of Digital Insulation and Continuity Testers offers a cost efferctive solution to testing where only basic test facilities are required. Instruments are available with single insulation test voltages of 500 Vd.c. or 1000 Vd.c. and test results are displayed on a clear 3-digit autoranging LCD. Full rated test voltage is produced when supplying up to 1mA load.

05/06 JJ
CLICK TO ENLARGE

Insulation testing to 1000 MO Continuity testing at 200 mA down to 0.01 O Live circuit warning (voltage display) and test inhibit Digital/Analogue display Alkaline or rechargeable batteries 10?C to +55?C operating temperature CATIII 600 V Conforms to EN61557-1 The MIT200 series will find applications in electrical contracting, both on domestic and industrial systems, as well as site maintenance and service departments.

The MIT200 series of insulation and continuity testers are ideal for testing transformers, motors, generators, switchgear, panel building, domestic appliances, power tools etc., as well as fixed electrical wiring systems.

Their small size and light weight make them ideal for those engineers that need to carry them for extended periods. 05/06 JJ
CLICK TO ENLARGE

mA insulation output current 200 mA short circuit current output Includes remot test switch probe

Optional accessories provide additional features RS232 port Current clamp The Megger BM400/2 Series of autoranging insulation and continuity testers, provides simplicity of use in a hand-held instrument designed to IEC1010-1 safety standards. The BM400/2 Series offers a range of single, dual and multi-voltage variants to fit specific applications. The insulation ranges output the nominal test voltage when loaded with 1 mA as specified within these standards. The continuity ranges have a short circuit test current of at least 200 mA. In addition to the insulation and continuity ranges, the BM400/2 series has a resistance range and 2 voltage ranges. The resistance range measures up to 100k ohm on the digital scale and up to 10 M ohm on the analog scale. Due to the low test voltage and current of this range, the instruments can be used to test circuits with sensitive equipment connected, without causing damage. 05/06 JJ

CLICK TO ENLARGE

Options of 250 V, 500 V, 1000 V insulation ranges 200 mA continuity range Instant response ZAP buzzer

Voltage measurement to 600 V MEGGER Intelligent Safety System Patented backlit display

K Ohms range for servicing Probe support for other measurements Waterproof and dustproof to IP54

Complies with the requirements of BS 7671 16th Edition, and EN61557 The MEGGER® BMM503 Insulation and Continuity tester provides all the necessary features for electrical installation testing and servicing needs. The instrument is microprocessor controlled to ensure outstanding performance with ease of use. For ultimate reliability, the BMM503 is waterproof and dustproof to IP54 and is supplied with a 3-year warranty.

05/06 JJ

CLICK TO ENLARTGE

Complies with the requirements of IEC 61340-5-1 10V ESD test capability 10/100/500V insulation testing

Insulation measurement up to 10 GO Live circuit warning Electronic locking test button

Remote control switched probe Waterproof and dustproof to IP54 The MEGGER BMM2000 ESD Insulation Multimeter has been designed to satisfy the testing of Electro Statis Devices as defined in CEI/IEC 61340-5-1. The instrument utilises advanced microprocessor technology to provide a host of features not normally associated with insulation and continuity testers. 05/06 JJ

CLICK TO ENLARGE

Insulation measurement up to 200 GO. (BMM2580) 200 mA Continuity Range Voltage, current and kO. resistance measurement Backlight mV Transducer inputs Result storage and Data Logging

PowerSuite Compatible RS232 output Download Manager Software included Direct Printer Output

Remote control switched probe IP54 Waterproof and Dustproof The MEGGER BMM2500 series of Insulation Multimeters utilise advanced microprocessor technology to provide a host of new features not normally associated with standard insulation and continuity testers. 05/06 JJ

Standard d.c. test voltage 100V, 250V 500V and 1000V Guard terminal Continuity range with polarity reversal Automatic discharge Low voltage brushless a.c. gemerator The Major Megger insulation and continuity testers MJ10 are modern, portable, self-contained instruments designed to give rapid and accurate measurements. They have four d.c. insulation testing voltages 100 V, 250 V, 500 V and 1000 V, and a single ins

05/06 JJ

CLICK TO ENALRGE

Simple to operate by just making connection and selecting the range Direct readings down to 0,01 O. provided by 3 1/2 digit L.C.D. Audible indication of test execution The MEGGER LT5 and LT6 Digital Loop Testers have been designed for quickly, accurately and reliably testing newly established and existing wiring installations. They are simple to use, both with the standard lead for socket tests and with the optional safety leads for performing tests on lighting installations and testing earth bonding.05/06 JJ

CLICK TO ENLARGE

Tests Phase-Earth and Phase-Neutral supply loops Low current loop test does not trip RCDs

Direct readout of Prospective Short Circuit, Current and Prospective Earth Fault Current

Makes measurements on supplies from 50V to 263V The MEGGER LT7 Digital Loop Tester is a small hand held instrument designed to accurately, reliably and easily measure loop resistances and prospective fault currents at socket outlets, distribution boards and light sockets. The LT7 may also be used for testing earth bonding. 05/06 JJ

CLICK TO ENLARGE

Combined 16th Edition testing Guaranteed non-tripping loop test range Backlit display and selector ranges

Automatic RCD testing (MFT1552 only) • Illuminated switch probe Selectable touch voltage

Touch (fault) voltage and display Calibrated earth loop test lead Calibration certificate

The MFT1500 is available in 3 options, the standard MFT1501/2 the MFT1502/2 which includes useful additional facilities such as backlit display and range switches, plus the unique Megger illuminated switched probe, and the MFT1552 which has an automatic RCD test feature. The unique modern styling of the instruments allows it to be operated whilst stood on the floor, a ledge, hung around the neck with the supplied neck strap, or held in the hand. The MFT1500 Series instruments use the patented Megger digital/analogue arc display. The analogue arc provides an indication of fluctuating readings, while the digital readout providing the ability to record accurate results. All test functions are selectable from the main panel, with no hidden ranges or functions to forget. 05/06 JJ

Combines the function of several instruments in one package Non-tripping loop test for tests on RCD protected cicuits RCD ramp test features actual tripping current Stores approximately 750 different test results in internal memory

The Megger CM500 Multifunction Installation Tester combines all the functions required to fully test domestic, commercial, and industrial fixed wiring, in accordance with international standards. The CM500 is the first installation tester with a non-tripping loop tester guaranteed not to trip any RCD rated 30 mA or above. Its memory and storage capability offers all data to display, download to a PC and on unique on-site print facility.

05/06 JJ

CLICK TO ENLARGE

Three kit options available Rubber armoured instruments Weatherproof IP54 Test leads included

Calibration certificates included 3 year warranty The MTK300 series test kits cover all the test requirements of the electrical engineer performing electrical inspection and testing on domestic, commercial and industrial installations for single and three phase applications. 05/06 JJ

CLICK TO ENLARGE

Extremely easy and safe to use Separate Live and Dead system testing Will not trip RCDs

Built-in protective front cover Tough rubber armoured instruments Weatherproof

3 year warranty From 2005 the Part P addition to the Building regulations becomes law. All new domestic installations and modifications to existing wiring, with few exceptions, will require testing by suitably qualified installers.Megger have bundled the New LRCD210 loop and RCD tester with two different insulation and continuity testers to offer customers a choice of test instruments that meet all the requirements of domestic premise testing under Part P, as well as BS7671. Two separate instruments allows dead testing (continuity and insulation) to be separated from live testing (Loop and RCD). The advantages are: Separate buildings can be tested simultaneously Simplified instrument operation • Instruments can be updated or replaced separately

05/06/JJ
CLICK TO ENLARGE

Dual Display, Dual - Parameter Measurements 0,5% Basic Accuracy Parallel/Series Mode

Relative Mode for Deviation Measurement The Megger Universal LCR Meter is a portable instrument designed for quick, easy testing and analysing of discrete components in a broad range of applications. The unit will accurately measure the value of inductances, capacitances and resistances at frequencies of 120 Hz and 1 kHz. 05/06 JJ

CLICK TO ENLARGE

Basic d.c. accuracy ±1% of full scale deflection, d.c. sensitivity 20 000 ohms/volts Fuse protection on all functions and ranges for increased instrument and user protection Robust centre-pole meter movement with a mechanical cut-out for over load protection The AVOMETER® Model 8 Mk 7 is a general-purpose, portable, analogue multimeter for the measurement of voltage, current and resistance.The Avometer Model 8 Mk 7 is suitable for use in many areas of electrical and electronic work in the laboratory, in the workshop and in the field. Measurements are easily made when fault finding, servicing or installing and commissioning equipment. The instrument is robust enough to withstand normal use in this type of work.05/06 JJ

CLICK TO ENLARGE

,000 and 40,000 count Dual display Analog bargraph updates 128 times every second True rms d.c. + a.c. and Average Responding Basic accuracy from 0.08% The M7000/M8000 Series of advanced analog/digital multimeters from Megger use the latest microprocessor technology to provide the most comprehensive measuring ranges and features in a hand held instrument. There are four instruments in the range, the two M7000 models are for more general applications yet still incorporate many advanced features, whereas the M8000 models have been designed to provide greater accuracy with additional extensive measuring capabilities. The M7000 units offer rugged dependability for use in the most severe field conditions. Both the M7027 and M7029 are supplied in rugged yellow cases with wrap around rubberized holsters for added protection against mishandling. The main difference between the models is that the 7027 has a basic accuracy of 0.3% and the M7029 has a basic accuracy of 0.2%. Both models have dual displays and the choice of operation in the 4,000 count or the higher resolution 40,000 count mode. The M8000 models provide more advanced features for applications requiring more extensive measuring capabilities. The M8037 is the is the top-of-the-line instrument. It measures TRMS dc and ac which will allow more accurate measurements of various waveforms: sine, sawtooth, square, pulse trains, triangle, spikes, etc., as well as distorted waveforms with the presence of harmonics. The M8037 also features a backlight display for easier reading in poorly illuminated areas. Both the M8035 and M8037 have basic accuracies of 0.08%, dual displays and the choice of operation in the manual or autoranging mode. Capacitance, frequency, conductance and diode test facilities are included as standard features, plus for more advanced measurement applications the ability to record, store, sort and compare results is also provided. 05/06 JJ

CLICK TO ENLARGE

Designed for Electricians Fully auto ranging Large display characters Separate battery and fuse cover

Data hold • Min/Max store IEC 61010 compliant Suitable for applications to CATIII 600 V

The AVO300 range of Megger digital multi-meters are tough compact instruments designed for the contracting electrician, but are also suitable for a wide range of applications and users. Both instruments offer a range of measurement modes for AC and DC applications, resistance and current measurement. 05/06 JJ

CLICK TO ENLARGE

0.01 mA resolution EMC and EN1010-2-32 compliance 30 mA, 300 mA, 30 A and 300 A range

The DCM300E Earth Leakage Clamp designed primarily to check earth leakage currents with a dedicated 30 mA range providing resolution down to 10 µA. The capabilities of the DCM300E extend to measuring currents of up to 300 A ac, making it a highly versatile instrument capable of taking current measurements in a wide variety of situations and applications. A typical application for the DCM300E would be the measurement of earth leakage current in a circuit where the GFCI repeatedly trips out. The measured result will quickly identify whether an excessive leakage current is causing the GFCI to trip, or if the GFCI itself is faulty. The DCM300E has 4 ranges: 30 mA, 300 mA, 30 A and 300 A with a best resolution of 0.01 mA. The analog-style bargraph of the DCM300E is very useful when monitoring changes, allowing the operator to easily interpret the rapidly changing bargraph rather than the digital display. Other key functions include the "Data Hold" feature which aids in measurements where there is a problem with accessibility or poor lighting, and the automatic power off feature that extends the battery life. This clampmeter was also designed with safety in mind and exceeds the latest safety design standards IEC1010-2-32 and EMC requirements. Extra safety features have been designed into the DCM300E to provide a safer working environment for the user. 05/06 JJ
CLICK TO ENLARGE

a.c. and d.c. Amps, Ohms, Diode and Continuity RMS measurement Auto-ranging and auto-zeroing

Excellent accuracy Megger's DCMR Series of digital clampmeters have a 4 digit LCD and are available in different version for maximum currents of 200A, 1000A and 2000A. They feature auto-ranging and auto-zeroing and can measure a.c., d.c., pulsed and mixed currents. Additional functions include the measurements of voltage, resistance, continuity and a diode test. the overall accuracy of 1.3% of the measured value has been achieved by utilizing the largest microprocessor technology, plus the use of a true RMS measuring technique. This accuracy even applies when harmonics or complex waveforms are present. 05/06 JJ

CLICK TO ENLARGE

Single, two or three core cable measurement Flat or round section cables No need to split wires

Cable centralising clamp Backlit display 50Hz and 60Hz supplies IEC 1010-2-032, CAT III 600 V safety protection use the MMC850 anywhere where you want to measure current without breaking a circuit or splitting cables. The MMC850 can also be used in place of traditional clamp meters, when commissioning, or for general maintenance work in electrical machinery and installations. 05/06 JJ

CLICK TO ENLARGE

Wide applications, including - Domestic, Industrial and Power Tools Easy to use with range sensitive passbands displayed Analogue/Digital display accurate digital readings and rapid response analogue display highlighting fluctuations The MEGGER® PAT32 Portable Appliance Tester will perform the basic electrical safety tests required for portable appliances and equipment. It can be used to test domestic appliances, industrial appliances and power tools. It performs seven tests on an appliance: Circuit test Fuse check • Earth continuity test 10 A Earth Bond 25 A Earth Bond nsulation test Extension leads (elt1 required)

The PAT32 will test appliances and tools rated at 240 V and 110 V a.c. since it is fitted with both BS 1363 and BS4343/CEE17 appliance test sockets. 05/06 JJ
CLICK TO ENLARGE

Fast Testing Tests 110 V, 230 V and IT equipment Full Test capabilities (Flash Test on PAT4DVF only)

Compatible with latest IEE Code of Practice Extension Lead Testing

QWERTY keyboard 10-Year Real TIme Clock The Mk3 Versions of PAT4 are compatible with all issues of the IEE Code of Practice for In-service Inspection and Testing of electrcial equipment. PAT4DV/3 & PAT4DVF/3 speed testing by working the way you work. PAT4 is quicker to start, test, download and upload.

Full Appliance and Client details are stored along with test results. New Appliances may be added as and where you find them. The combination of Quick Boot, Auto Restart, Real Time Clock, Group Test Codes, Quick Check and Instant Certification will save you up to 50% of your time, resulting in increased efficiency, improved productivity and increased profits for your company compared to other testers. 05/06 JJ

CLICK TO ENLARGE

Four test voltages to 5 kV Dual power supply option giving the best of both worlds Resilient mounted analogue scale for robustness Voltage range to 600 V indicates auto discharge Pass/fail overlays for rapid testing • Single scale for insulation values to avoid operator error The MEGGER BM15 and MJ15 are com-pact 5 kV insulation testers. They are very simple to use and provide a quick and accurate reading of insulation resistance. The instruments use an analog display with a maximum reading of 20 GO. The BM15 is powered by batteries. The MJ15 has an additional hand-cranked generator.

05/06 JJ
CLICK TO ENLARGE

Three- or four-terminal measurement selected by a switch • 50 volt maximum output voltage for safety and convenience Direct-reading 3 1/2-digit L.C.D. Four ranges covering measurements from 0.01 O to 19.99 kO

The MEGGER DET3/2 Digital Earth Tester is a compact instrument designed to measure earth electrode resistance and soil resistivity. The instrument uses the four-terminal method of measurement, in which the resistance of the current circuit does not affect the reading. The instrument circuit has been designed so the resistance of the potential circuit also does not affect the measurement. Pressing a latchable button converts the instrument from its four-terminal measurement mode to a three-terminal one. The reversing d.c. test current has a frequency of 128 Hz, which avoids possible interference from other 50 and 60 Hz stray currents in the vicinity of the earth electrode under test. In the interests of safety, the maximum test voltage has been limited to 50 V. 05/06 JJ

CLICK TO ENLARGE

Simple, fully automatic operation Choice of three or four terminal measurement Autoranging from 10 mO to 20 kO Tests to BS7671, BS7430, BS6651 and VDE 0413 • High tolerance to spike resistance helps testing in urban areas Noise rejection to 40 V The Megger DET5/4D is fully automatic, four terminal instruments built into a rugged, water resistant case giving protection for outdoor use. The instrument is suitable for the testing of earth electrodes and measuring earth resistivity. Operation is started by pushing one of two buttons on the front panel; one for three terminal measurement and one for four terminal testing. All other functions of the instrument are completely automatic. The instrument checks for conditions that may cause an invalid reading during a test. The low service error and wide operating temperature range enable accurate results to be achieved in real on-site conditions. 05/06 JJ
CLICK TO ENLARGE

Fault indication on main and remote units Tests TIA568A/B, USOC, ISO11801 and EN50173 configured networks Automatic testing of screen on Shielded Twisted Pair (STP) cables Magnetic locking of main and remote units when not in use Automatic power on/off Continuously sequencing LED

The MEGGER SCT100 Structured Cabling Tester checks and verifies UTP and STP patch cables and installed networks, providing simple and instant results via LED indicators. The product consists of a main and remote unit, both of which indicate shorts, opens, pair reversals and other mis-wires on 2, 3 and 4 pair structured wiring systems in accordance with TIA568A/B, ISO11801, EN50173 and USOC standards.

Indication of fault conditions on both the main and remote units sets the MEGGER SCT100 apart from competing products by enabling the user to make time savings of up to 50 percent. 05/06 JJ

CLICK TO ENLARGE