T W International limited Tungsten Carbide Cutter

Tungsten Carbide Cutter

9901 3.2 mm Tungsten Carbide Cutter

Ref: S9901

Price: £4.85 / $7.28 (£5.82 / $8.73 Including VAT at 20%)

DESCRIPTION

A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.

USES

Ideal for shaping, smoothing or removing material from especially hard materials—including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

TIPS

Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit.
CLICK TO ENLARGE

9902 2.4 mm Tungsten Carbide Cutter

Ref: S9902

Price: £5.75 / $8.63 (£6.90 / $10.35 Including VAT at 20%)

DESCRIPTION

A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.

USES

Ideal for shaping, smoothing or removing material from especially hard materials including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

TIPS

Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

9903 3.2 mm Tungsten Carbide Cutter

Ref: S9903

Price: £4.80 / $7.20 (£5.76 / $8.64 Including VAT at 20%)

DESCRIPTION

A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.

USES

Ideal for shaping, smoothing or removing material from especially hard materials including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

TIPS

Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

9904 2.4 mm Tungsten Carbide Cutter

Ref: S9904

Price: £4.80 / $7.20 (£5.76 / $8.64 Including VAT at 20%)

DESCRIPTION

A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.

USES

Ideal for shaping, smoothing or removing material from especially hard materials including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

TIPS

Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

9905 3.2 mm Tungsten Carbide Cutter

Ref: S9905

Price: £4.80 / $7.20 (£5.76 / $8.64 Including VAT at 20%)

DESCRIPTION

A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.

USES

Ideal for shaping, smoothing or removing material from especially hard materials including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

TIPS

Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

CLICK TO ENLARGE

9909 3.2 mm Tungsten Carbide Cutter

Ref: S9909

Price: £4.80 / $7.20 (£5.76 / $8.64 Including VAT at 20%)

DESCRIPTION

A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.

USES

Ideal for shaping, smoothing or removing material from especially hard materials including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

TIPS

Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

02/07 JJ
CLICK TO ENLARGE

9910 3.2 mm Tungsten Carbide Cutter

Ref: S9910

Price: £4.80 / $7.20 (£5.76 / $8.64 Including VAT at 20%)

DESCRIPTION

A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.

USES

Ideal for shaping, smoothing or removing material from especially hard materials including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

TIPS

Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

9911 3.2 mm Tungsten Carbide Cutter

Ref: S9911

Price: £4.80 / $7.20 (£5.76 / $8.64 Including VAT at 20%)

DESCRIPTION

A high-speed cutter made of tungsten carbide, the hardest material next to diamonds.

USES

Ideal for shaping, smoothing or removing material from especially hard materials—including hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods.

TIPS

Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

Clearance goods Many Size and Shape Down Lighters at giveaway prices See our special offers Section Many Fixings and Screws Job lot offers See our special offers Section Two ex-demonstration WS81 Soldering Station like new ONLY £115.00 EACH One ex-demonstration WD1000T ONLY £190.00 New Carpenters cropping machine Carpenters wire cutting machine open to offers Call us NOW Carriage Paid Orders Only £50. SAME DAY DISPATCH ON MOST PRODUCTS. YOU CAN CALL US ON 01249 822100. We can provide Demonstrations on selected Products. ISO 9001 Registered Company Department of Fair Trading Registered Company Supplier to NATO and the MOD Manufacturing in Europe and China.