T W International limited Engraving Cutters 2.4 mm

Engraving Cutters 2.4 mm

105 0.8 mm Engraver

Ref: S105

Price: £1.18 / $1.77 (£1.42 / $2.13 Including VAT at 20%)

DESCRIPTION

A high-speed cutter designed for precision engraving.

USES

Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.

TIPS

Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure.

Do not use this bit with hardened materials.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

CLICK TO ENLARGE

106 1.6 mm Engraver

Ref: S106

Price: £1.18 / $1.77 (£1.42 / $2.13 Including VAT at 20%)

DESCRIPTION

A high-speed cutter designed for precision engraving.

USES

Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.

TIPS

Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure.

Do not use this bit with hardened materials.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

02/07 JJ
CLICK TO ENLARGE

107 2.4 mm Engraver

Ref: S107

Price: £1.18 / $1.77 (£1.42 / $2.13 Including VAT at 20%)

DESCRIPTION

A high-speed cutter designed for precision engraving.

USES

Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.

TIPS

Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure.

Do not use this bit with hardened materials.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

02/07 JJ
CLICK TO ENLARGE

108 0.8 mm Engraver

Ref: S108

Price: £1.18 / $1.77 (£1.42 / $2.13 Including VAT at 20%)

108 0.8 mm Engraver Ref: 108

DESCRIPTION

A high-speed cutter designed for precision engraving.

USES

Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.

TIPS

Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure.

Do not use this bit with hardened materials.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

02/07 JJ
CLICK TO ENLARGE

110 1.9 mm Engraver

Ref: S110A

Price: £1.25 / $1.88 (£1.50 / $2.25 Including VAT at 20%)

DESCRIPTION

A high-speed cutter designed for precision engraving.

USES

Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.

TIPS

Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure.

Do not use this bit with hardened materials.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.
CLICK TO ENLARGE

111 0.8 mm Engraver

Ref: S111

Price: £1.25 / $1.88 (£1.50 / $2.25 Including VAT at 20%)

DESCRIPTION

A high-speed cutter designed for precision engraving.

USES

Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.

TIPS

Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure.

Do not use this bit with hardened materials.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

02/07 JJ
CLICK TO ENLARGE

113 1.6 mm Engraver

Ref: S113

Price: £1.25 / $1.88 (£1.50 / $2.25 Including VAT at 20%)

DESCRIPTION

A high-speed cutter designed for precision engraving.

USES

Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals.

TIPS

Use the sides of the cutter (rather than the tip) for effective engraving. The tip cuts poorly and can break under pressure.

Do not use this bit with hardened materials.

Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact).

If chattering occurs, increase speed.

02/07 JJ
CLICK TO ENLARGE

Clearance goods Many Size and Shape Down Lighters at giveaway prices See our special offers Section Many Fixings and Screws Job lot offers See our special offers Section Two ex-demonstration WS81 Soldering Station like new ONLY £115.00 EACH One ex-demonstration WD1000T ONLY £190.00 New Carpenters cropping machine Carpenters wire cutting machine open to offers Call us NOW Carriage Paid Orders Only £50. SAME DAY DISPATCH ON MOST PRODUCTS. YOU CAN CALL US ON 01249 822100. We can provide Demonstrations on selected Products. ISO 9001 Registered Company Department of Fair Trading Registered Company Supplier to NATO and the MOD Manufacturing in Europe and China.